Introduction: The HTH nitrogen and carbon purification nitrogen generator is based on the PSA pressure swing adsorption nitrogen generator, adding a hydrogen purification system, which improves the purity of the original nitrogen to ≥99.999% high-purity nitrogen, providing individuality for special industries We provide customized and specialized high-purity nitrogen production equipment and installation and application programs, and provide after-sales service during equipment operation, fully meet the gas requirements of different users, quickly solve user problems, and ensure long-term, stable and reliable operation of nitrogen production equipment .

working principle:

The working principle of PSA nitrogen production: Using high-quality carbon molecular sieve as the adsorbent, nitrogen is produced from the air under a certain pressure. The clean compressed air from the air buffer tank enters the pressure swing adsorption separation system filled with adsorbent in the absorption tower, and performs pressure adsorption and decompression desorption in the adsorber. Due to the kinetic effect, the diffusion rate of oxygen in the pores of the carbon molecular sieve is much greater than that of nitrogen. When the adsorption does not reach equilibrium, the nitrogen is enriched in the gas phase to form the finished nitrogen. Then the pressure is reduced to normal pressure, and the adsorbent desorbs the adsorbed oxygen and other impurities to realize regeneration. Generally, two adsorption towers are installed in the system. One tower absorbs nitrogen and the other tower desorption and regeneration. It is automatically controlled by PLC program to make the two towers work alternately to achieve continuous production of nitrogen with a purity of ≥99%.

Nitrogen hydrogenation purification system: the 99% purity of the general nitrogen from the nitrogen buffer tank is mixed with a certain proportion of hydrogen in the nitrogen-hydrogen mixer, and after entering the deoxygenation tower, under the action of the palladium catalyst, the general nitrogen Oxygen and hydrogen react to produce water, which then enters the dryer through the condenser and filter. Removal of impurities such as moisture and dust in the nitrogen, the final nitrogen purity is ≥99.999%.

Technical index:

Nitrogen output: 5-3000 Nm3/h

Nitrogen purity: 99.999%

Nitrogen pressure: 0.6-0.7Mpa

Dew point: ≤-60℃ (under normal pressure)

Main features of HTN variable pressure nitrogen generator:

1. Perfect fluent design, optimal use effect;

2. Reasonable internal components, uniform airflow distribution, reducing the impact of high-speed airflow;

3. The unique protection measures of molecular sieve extend the service life of carbon molecular sieve;

4. Simple operation, stable operation, high degree of automation, and can be operated without anyone;

5. Automatic interlocking nitrogen exhaust device to ensure the quality of product nitrogen;

6. Optional nitrogen device flow, automatic purity adjustment system, remote monitoring system, etc.;

Application scenario

Electronics industry: Nitrogen protection for the production of semiconductors and electronic components

Heat treatment: bright annealing, protective heating, powder metallurgy and magnetic material sintering, etc.

Chemical industry: nitrogen blanketing, replacement, cleaning, pressure conveying, chemical reaction agitation, chemical fiber production protection, etc.